Glf500 Water Well Drill/Drilling Rig RC Control DTH Track Drill/Drilling Rig Machine Rig Price

Basic Info

Model NO.	GLF500
Warranty	1 Year
Certification	CE
Condition	New
Motor	Diesel Engine
Drill Hole Diameter	105-305mm
Drill Hole Depth	Max 300m
Bit Type	DTH Bit, PDC Bit, Tricone Bit, as Per Requirement
Drilling Way	Rotary
Type	Crawler
Transport Package	Standard Packing
Specification	6.8*2.1*2.9 m
Trademark	Glorytek
Origin	Beijing, China
HS Code	8430412100
Production Capacity	20sets / Month

Product Description

GLF500 RC Drilling RigProduct Description 1-Technical Parameter

Model	GLF500
Max. drill depth	300m
Drill diameter	105-305mm
Working air pressure	1.05-3 MPa
Air consumption	16-55 m³/min
Drill rod length	3m
Drill rod diameter	Φ89,102,108,127mm
Axial pressure	6t
Lifting force	20t
Slow lifting speed	4m/min
Slow feed speed	0.5-8m/min
Fast lifting speed	20m/min
Fast feed speed	32m/min
Rotation torque	9000Nm; 4500Nm
Rotation speed	0-75r/min;0-150r/min
Penetration rate	10-25m/h
Small winch lifting force	1.5t
wire rope length	60m
Feeding efficiency	10-25m/h
Grade ability	25°
Weight	12t
Whole dimension	6.8*2.1*2.9 m
Application formation	Loose layer and bedrock
Drill method	Air reverse circulation drilling, down-the-hole hammer drilling
Hammer	Middle pressure and high air pressure series

Features:

1. Diesel engine-driving hydraulic system. Walk, Travel, rotate, feed, hoist, land, lift, compensate, unload and so on are all run by hydraulic components.2. During rock drilling operation, it can work with down-the-hole hammer, and also reverse circulation hammer. Air compressor will provide wind to drive and slag. During operation, use regular dth hammer and ordinary drill pipe for direct drilling, or use the reverse circulation hammer and double-wall drill pipe (air inlet from the drill pipe interlayer and slag discharge from the inner pipe) for reverse circulation drilling.3. If cutting or cones are used to make holes, mud can be used to discharge slag.4. The working device is composed of feed mechanism, top drive rotary machine, sliding frame (mast), centering device, rod unloading mechanism, hoisting system, etc. 5. The top drive rotary machine is realized by the hydraulic manifold block to achieve bipolar torque and bipolar speed with equal power output, low speed and high torque and high speed and low torque. To adapt to different working conditions and holes.6. The rotary machine can be turned away from the drilling axis, which is convenient for the operation of the hoisting machine.7. The cylinder plate chain propulsion method is reliable and durable.8. The roller slide is durable and wear-resistant.9. The thrust axis pressure, thrust speed and rotation speed are adjustable.10. The small hoist has a lifting force of 1.5 tons, and a steel wire rope is 60 meters long. It can lift drilling tools, tools, etc., or assist in loading and unloading drill pipes. 11. The walking is a crawler type self-propelled structure, which is easy to move. It adopts crawler type chassis. Steel track (inlaid with rubber blocks are optional, which is convenient for walking on urban roads). It is equipped with four high outriggers as standard. When it is transported over long distances and is loaded by a car, it does not need to be lifted, and it can be directly mounted on the car, which is convenient for transportation.12. Independent hydraulic oil radiator, the hydraulic oil will not produce high temperature when the rig is working continuously.13. There are four hydraulic outriggers to adjust the angle and stability of the car body during operation.14. The mast can be fixed to the car body during operation, and there is a rear support rod to improve the stability of the mast operation. 15. There is a level and a special centering device to ensure the accuracy of the hole.16. The compressor system has a special lubricator to increase the service life of the impactor under deep hole conditions.
Related Products
We can also supply other drilling rig, drilling equipment and drilling tools, such as Trailer Mounted Drilling Rig, Truck Water Well Drill Rig, Core Drill Rig, Mud Pump, Air Compressor, DTH Hammer, Tricone Bit, Drag Bit, DTH Bit, etc.

Packing and Transport
Packing: Seaworthy Packing
Delivery: about 30 days after your down payment.

Company Profile

 

Glorytek Industry (Beijing)., located in Beijing, China, is an integrated corporation specialized in manufacturing and exporting top quality drilling equipment and drilling parts for decades. We are supported and assisted by a highly experienced team of designers and engineers that enable us to complete all the assigned projects successfully as per the specified requirement from our clients.

Our products are widely used in the scope of mining, water well drilling and exploration, anchor grouting project, side slope protection engineering, oil and gas engineering,underwater rock drilling & blasting operations of seaport channel, hydropower project, national defense projects ect.

Exhibition

Certifications

 

Customer Photos

 

After-sale Warranty

(1) Within the period of the first year after delivery, the main parts of Drilling Rig are guaranteed to be supplied free of charge once the problem caused by the quality issue.

(2) Service at working site: If need, our technical engineer can be dispatched to the working site for technical service, but the expense of ticket, accommodation, diet, service charge shall be on buyer's account.

(3)Timely after-sale assistance shall be provided all the time.

FAQ
Q: Are you original manufacturer or trading company?
A: We are an integrated corporation specialized in manufacturing and exporting.

Q: Can you supply related drilling tools?
A: Yes, we can supply full set of drilling tools, such as drill pipe, tricone bit, PDC bit, drag bit, DTH hammer and bit. Moreover, we have drilling equipments like mud pump, air compressor, etc. as well.

Q: Which payment terms can you accept?
A: Normally we prefer 30% advance payment after purchase order by T/T, 70% remaining payment before shipping by T/T.

Q: How is your delivery time?
A: This will depend on your purchasing quantity. Normally we can deliver within 30days.

Q: How can you ensure the quality?
A: We have our professional QC and all the products will be strict inspection and testing for every order before shipping out.
Contact Us

Jane Cheng
Sales Representative

Glorytek Industry ( Beijing )
Address:No.B-2507, DongWeiCheng, GuanZhuang,Chao Yang District, Beijing, China.