Geological Exploration Drilling Pipe Bq, Nq, Hq, Pq, Drill Rod

Basic Info

Model NO.	BQ, NQ, HQ, PQ/PHD
Application	Mining Exploration
Grade	4140
Transport Package	Bundles
Specification	AW, BW, NW, AWJ, BWJ, NWJ
Trademark	CROWN
Origin	China
Production Capacity	500PCS/Day

Product Description

Geological Exploration Drilling Pipe BQ, NQ, HQ, PQ, Drill Rod

 

Brief Introductions of Casing Pipe
It is used for protecting subsurface formations. It also protects the wellbore from collapsing. Owing to its functions, circulation and extraction of drilling fluid are allowed to take place. Geotec have years of experience in producing quality casing pipes, any of your requirements will be warlmly welcomed.

Features of Casing Pipe
1) Use optimized buttress thread so that the connecting strength can reach the strength of the pipe body.2) High seal reliability: this product has the multi-seal configuration.3) The joint has high capability to resist compression, bending and over-torque load with the reverse torque internal shoulder.4) Energy loss reduction: the air and liquid turbulence are reduced by the inner flat design.

Available size for Casing Pipe
"W" Design: RW,EW,AW,BW,NW,HW,PW,SW,UW,ZW/HWT,PWTMetric Series: 46,56,66,76,86,101,116,131,146"X" Design: RX,EX,AX,BX,NX,HX,PX,SX,UX,ZX Product Description

QB Series Rod Parameter-Geological Steel Pipe-Entire Length Thermal Treatment NC Lathe With Former Cutters
Spec.	Unit	BCB	NCB	HCB	PCB
OD/ID	mm	55.6/46	71/60	89/77.8	114.3/101.6
Thickness	mm	4.8	5.5	5.6	6.35
Length	m	1.5 or 3	1.5 or 3	1.5 or 3	1.5 or 3
Weight	kg/m	6.01	8.8	11.51	17.3
Thread Length	mm	44.45	44.45	44.45	63.5
Thread Pitch	thread/inch	3	3	3	2.5
Box Thread Tooth Height	mm	0.76	0.76	0.76	1.17
Pin Thread Tooth Height	mm	0.88	0.88	0.88	1.27
Thread Tooth Angle	.	29	29	29	29
Tensile Resistance(A Series)	kn	400	530	510	565
Tensile Resistance(B Series)	kn	450	615	625	660
Bore Depth	m	1200	1000	900	800

RC series Rod parameter-geological steel pipe-entire length thermal treatment NC lathe with former cutters
Spec.	Unit	BRC	NRC	HRC	PRC
OD/ID	mm	55.6/46	69.9/60.3	88.9/77.8	114.3/101.6
Length	m	1.5 or 3	1.5 or 3	1.5 or 3	1.5 or 3
Weight	kg/m	6.01	8.8	11.51	17.3
Thread Length	mm	42	42	41.91	63.5
Thread Pitch	thread/inch	3	3	3	2.5
Box Thread Tooth Height	mm	0.76	0.76	0.76	1.17
Pin Thread Tooth Height	mm	0.88	0.88	0.88	1.27
Thread Tooth Negative Angle	.	5	5	5	5
Tensile Resistance(A)	kn	450	525	545	565
Tensile Resistance(B)	kn	530	625.5	602	660
Process	Cutting-Upsizing-Machining-Heat Treatment-Machining-Phosphating-Antirust.
Type	Connect Directly, Coupling, Upsizing Without Coupling.
Material	30CrMnSiA or 45MnMoB(A grade), XJY850 or BG850( B grade)