Hex Round Sandvik Epiroc Atlas Copco Top Hammer Down The Hole DTH Rock Drilling Tapered Intergral Threaded Extension mm Mf Speed Drill Rod for Sale

Basic Info

Model NO.	T45
Color	as Requested
Transport Package	Plywood
Specification	Hex22/Round/API Reg
Trademark	Sanproco
Origin	China
HS Code	72288000
Production Capacity	10000m/Month

Product Description

(1) Tapered drill rod

Tapered drill rod (taper steel rod, taper drill steel), which provides a hexagonal chuck section to provide leverage for the rotation chuck bushing. It usually has a forged collar to maintain
the proper shank striking face position in the rock drill, and a tapered bit end.

For drilling medium-hard to hard and abrasive rock formations, 11 and 12 taper degree rod are widely used on heavy-duty modern hydraulic drill rigs. While, 6 and 7 taper degree rod are applied for light-duty rock drill, such as the hand held pneumatic rock drill Y18, Y20, Y24, Y26, YT24 and YT28.

SANSUNG offers a complete line of tapered rods and bits for all of your hand-held pneumatic drilling needs. For mine, quarry and tunnel work, we provide quality tools that withstand the toughest rock drilling demands.

With our comprehensive product line, you can find the exact configuration to integrate into your drilling operation. Our tapered bit and rods come in a variety of taper angles, and we provide tapered rods in a full range of shank configurations and steel hex diameters. Our tapered bits include both cross and button designs, as well as chisel design. SANSUNG tapered rods are available with high-frequency or fully carburized heat treatments.

Specifications of tapered drill rod:

Model	Taper Degree	Drilling Rod Length	Shank Size
Hex.19mm	4.46, 6, 7, 11 and 12	0.4m-4.0m	83mm,108mm
Hex.22mm	4.46, 6, 7, 11 and 12	0.4m-4.8m	108mm
Hex.25mm	4.46, 6, 7, 11 and 12	0.8m-4.8m	108mm,159mm

(2) Integral drill rod

Application of Integral Drill Rods:
The integral drill rod is used for rock drilling, blasting holes and other drilling works in the quarries, coal mines, traffic and other constructions.
Features of Integral drill rods:
Integral Drill Rod is used by a hand-held drill machine in underground mining for small hole drilling, equipped with small power rock drills, like air leg rock drills, hand held rock drills, etc.
It can reduces the expense of impact energy, improves the drilling speed and efficiency, also it can be used for drilling bore hole diameter from 28mm to 45mm usually.
According to different application, different lengths are available from 400mm to 4800mm usually.
Regarding Integral drill steels, the quality of a steel material and a tungsten carbide is very important to get good drilling performance.

Integral Drill Rods Specification:

1. Head diameter: 28mm to 45mm
2. Shank size: hex19/hex22/hex25*108mm/159mm
3. Length: 400mm to 4800mm

(3) Extension rod / MF rod

Other names are Extension drill steel, Extension drill rod, and Extension steel, M/F rod (Speed rod), produce Hexagonal and round cross-sections. Hexagonal rods are more rigid, heavier and transfer energy more efficiently, while increasing flushing. Round rods are generally lighter than hexagonal rodsand are normally used in extension drilling applications. With the longer steel tending to be larger in diameter, conventional extension steel is characterizedby duplicate thread on each end of the steel.Extension rods are made by hollow drill steels, different lengths are available from 600mm to 6400mm. This hollow hole are usually named flushing hole, used for transmitting water or air during drilling. And the threads can be used for connecting couplings, shanks adapters or bits.

No.	Specification
1	Drill Rod Type	Male-Male Rod, Male-Female Rod
2	Thread	R22, R25, R28, R32, R35, R38, T38, T45, T51 ST58/ST68 GT60 etc.
3	Rod size	Hex 22mm, hex 25mm, hex 28mm, hex 32mm, hex 35mm, Round 32mm,Round 39mm, Round 46mm, Round 52mm, Round 60mm, Round 76mm.
4	Length	0.4m-6m
5	Package	in wooden case or in bundles

(4) DTH drill pipe / drill pipe

Key features of a high quality DTH pipe are durability, accuracy and manage ability. SANSUNG's pipes are made from cold drawn piping, providing a superior surface finish and tolerance compared to conventional pipes made from hot rolled piping. This drastically reduces the risk of scaling from the pipes entering the hammer, a major cause of premature hammer failure.The joints are friction welded to achieve maximum strength,and the threads of the end-pieces are heat treated for optimum durability and strength of the thread profile. This not only ensures long thread life, but also makes coupling and uncoupling quick and simple, reducing drilling time.Pipe diameter should be close to the hammer diameter to provide optimum flushing, reducing the chances of getting stuck.